|Pressure Range:||11.6kPa-101.3 KPa||Pressure Fluctuation:||≤5％|
|Material:||Stainless Steel Plate SUS304||Temp Range:||-70 °C (-94 °F)~150 °C (302 °F)|
controlled environment chamber,
environmental testing machine
the test box meets and executes the standards
B11158-2008 high temperature test chamber technical conditions
Gb10589-2008 low temperature test chamber technical conditions
Gb10592-2008 high and low temperature test chamber technical conditions (temperature alternations)
GB/ t2423.1-2008 environmental tests for electrical and electronic products - part 2;Test method test A;Low temperature (IEC60068-2-1;2007).
Environmental tests for electrical and electronic products - part 2;Test method test B;High temperature (IEC60068-2-1;2007).
Environmental tests for electrical and electronic products - part 2;Test method test N;Temperature variation (iec 60068-2-14)
Environmental test methods for military equipment laboratories - part 3: high temperature test
Gjb150.4a-2009 environmental test methods for military equipment laboratories - part 3: low temperature test
Structural features of test box:
1. The test box body is formed by laser processing, which is beautiful and generous in shape, with no reaction handle, and easy to operate.
2. The inner box is made of imported first-class stainless steel (SUS304) mirror plate, while the outer box is made of brushed stainless steel or first-class cold-rolled steel plate, which increases the appearance texture and cleanliness.
3. A large observation window is equipped with a light to keep the inside of the box bright, and the inside situation of the box can be clearly observed at any time by using tempered glass embedded in the heating body.
4. A test hole with a diameter of 50mm is provided on the left side of the box, which can be used for connecting test power cord or signal cable externally.
5. The insulation material is made of high-density glass fiber cotton with a thickness of 100mm.A double layer of high tension and low temperature resistant sealing strip is adopted between the door and the box body to ensure the sealing of the test area.
6. An independent temperature limit alarm system is set up to ensure the safety of the test without accidents when the temperature exceeds the limit and the operation is automatically interrupted.
|Applicable scope||This equipment is used to simulate the reliability and performance evaluation of products at high altitude and low pressure.|
|Structure part||Box||Double-sided galvanized steel, surface spray treatment|
|Inner box||Using stainless steel plate SUS304 (size can be customized)|
|Observation window||The door is equipped with a window, a glass window for the multi-layer vacuum glass, with automatic defrost function, the glass surface of the film electronic heating can guarantee any test glass surface frost and condensation|
|Bear the way||The use of high-quality 5mm thick sus304 non-slip stainless steel plate as the pressure within the box, in the box and the outer box asked around the use of steel to strengthen its overall pressure strength design capacity of more than 10t / m. The walls are smooth, smooth, burr and pits, easy to clean, in the course of the use of water will not appear|
|Technical Parameters||display||PLC touch screen display|
|Pressure range||11.6kPa-101.3 kPa|
|Vacuum Description||1.3Kpa (standard requirements at an altitude of 15240m 11.6Kpa, vacuum table indicates the value of 89.7Kpa)
Note: due to the atmospheric pressure inside the box
Atmospheric pressure: (101.325Kpa), but at this time want to box atmospheric pressure down to (11.6Kpa). According to the standard atmospheric pressure (101.325Kpa) to calculate the box to take away (89.7Kpa) of the pressure, this time is (11.6Kpa) low-pressure environment. Because now the table used to show negative pressure, so the table shows the negative pressure (89.7Kpa), the box there are (11.6Kpa) low pressure.
1. Do you offer after-sales service? How can I ask for that? And how about the warranty?
We offer complete engeneering and technical support ,prompt emergency service,remote installetion,remote maintenance service and more.We are equipped with over 20 technical and support you.All of the products from MENTEK comes with 12 Month warranty.
2. What’s the delivery term?
The products delivered to you within 7 days for our stock items from clearance of payment. It will take 25-to-35 working days for custom made products or equipments that are not available from stock.
3. Do you accept customization service? Can I have my logo on the machine?
Yes,all of our product can be customized and if you have requirement of logo, we also can do it for you.
Q:How about the packing for machine, is it safely protected during transportation?
All of the products from MENTEK,first protected by resin fiber and PP film, then put into Strong wooden case.We can ensure the safety of our products.
Q:Can we visit your factory before order?
Yes,and we welcome customers to visit our factory.
How can I become an overseas agent for your company?
Add my Wechat,Whatsapp,Skype +86 15617685848
Contact Person: Mr. Martin Zeng