|Material:||Stainless Steel Plate(SUS304)||Power:||AC 380V±10%, 50/60Hz|
|Temperature Deviation:||±2.0°C||Product Name:||Walk-In Test Chamber|
temperature cycling chamber,
temperature humidity test chamber
High-Strength Cold-Rolled Steel Sheet Walk-In Environment Simulation Test Chamber
Walk in temperature humidity test machine is used for light-duty testing or long-term steady-state evaluation of pharmaceuticals and other products to do the low temperature,high temperature,the charge of high low temperature,constant humidity and heating,high-low temperature alternating humidity and heating test. Provide large-scale parts,semi-finished product,finished product for large-scale temperature and humidity testing environment space for industry.It mainly composed of control panel,switchboard, monisturizing base plate blower,heating machine,humidity machine,refrigerator,can also be customized.
Walk in chamber simulates the effects that a range of temperature change and humidity conditions have on a product or material,and it usually comes in a variety of sizes, whether a small box (usually of integral construction) that fits on the bench top or a room-sized chamber (usually of penalized construction) for large objects or for testing large batches of product simultaneously. Temperature ranges from -60° C to +85° C and relative humidity ranges between 20% and 95% are available. A walk in chamber can also be used for constant temperature and/or humidity climate test conditions that are needed for product testing .
Automotive integrated environment for the car manufacturers to provide product development in the performance of the test. The test cabin is mainly composed of cabin body structure, air conditioning system, fresh air system, dynamometer system, exhaust system, solar radiation system and other components.
◆GB1835203-2005 Emission test
◆GB/T658-2000 Air conditioning test
◆ GB18233-2003 Fuel consumption test
◆GB/T12542-1990 Thermal balance test
◆GB/T12781-1991 Lubrication test of automobile oil supply system
◆GB/T12546-1990 Automotive Thermal Ventilation Test
◆GB/T12544-1991 Car heating test (air conditioning)
◆GB11555-1994 Defrost test defrost test
◆GB/T12535-1991 Low temperature start test
◆GB/T12544-1990 Maximum speed test
◆GB/T12543-1990 Accelerated test
◆GB/T12536-1990 Glide test
◆GB/T12546-1990 Minimum stable speed test
|Temp & Humidity Range||-60℃,-40℃,-20℃,0℃～+85℃||25％～95％RH(Optional)|
|Temp & Humidity Fluctuation||±0.5℃||±2.5％RH|
|Temp & Humidity Deviation||±2℃||±3％RH(＞75％RH); ±5％RH(≤75％RH)|
|Temp Change Rate||2℃～2.5℃/m heat-up||1℃/m cool-down|
|Standard configurations||1 Window, 1 Cable port, 1 Lamp, 4 Casters, 1 Power cable, 2 Stainless steel shelves|
|Standard Documentations||quality certification,test report ,user operaion manual for machine & controller|
|Safety devices||Electric leakage, fan overheat ,anti-dry ,compressor overheat & overpressure,power supply undercurrent,overheat, overcurrent, phase sequence, over-temperature protection devices
1.Circulating wind selection: Patio air supply or variable speed motor
If your product has special requirements for air supply wind speed, this program is your best choice.
2.Water supply system selection: RO reverse osmosis
Our equipment to do the humidity, the use of pure water, that this automatic way to make water without interruption to provide pure water, so as to achieve easy and convenient results.
3.Polymer membrane / runner dehumidification system
If long-term low-temperature and low-humidity test conditions are required, then the cellular dehumidification system is an option, and the Humidity Range is required to achieve 10 ° C / 10% RH or less.
We provide complete specifications from the United States imports of professional LN2 / LC02 solenoid valves and related control systems to achieve your rapid cooling temperature of the test requirements.
5.Ultrasonic cooling humidification system
If you have to carry out a dynamic test of high heating load under high temperature and high humidity, the ultrasonic cooling and humidification system is meeting the important requirements of this strict requirement.
6.Added glass inner door and hand operated hole
For the often need to test the movement of objects and start. (125mm * Ea) can be added to the glass door to avoid the impact of the door opening on the test environment.
7.Instant access to test data recorder
When the need to test the environment at the same time and the temperature of the multi-point measured object temperature measurement records, increased load specification recorder is the only choice to achieve the demand.
8.Computer connection operation recording software
When the software for the R & D of Metrology 's ring testing machine, its powerful function can monitor and control the machine at the same time, access to the information in the machine, providing the most convenient
Contact Person: Mr. Martin Zeng