|Product Name:||Temperature And Humidity Testing Chamber||Capacity:||250L~1500L|
|Shell:||High Strength Cold Rolled Steel Sheet||Temp Range:||-70°C~100°C|
|Temp Fluctuation:||±0.3°C~±0.5°C||Cooling Rate:||5°C~20°C/min|
|Power:||AC 220V/380V±10% 50/60Hz||Ramp Rate:||1°C/min As Standard, 3-20 C/min Is Custom|
controlled environment chamber,
environmental testing machine
Spraying Galvanized Color Steel Plate Experimental Test Chamber Temperature And Humidity Environment Simulation
Can be purchased according to demand :
1. Circulating wind selection: Patio air supply or variable speed motor
If your product has special requirements for air supply wind speed, this program is your best choice.
2. Water supply system selection: RO reverse osmosis
Our equipment to do the humidity, the use of pure water, that this automatic way to make water without interruption to provide pure water, so as to achieve easy and convenient results.
3. Polymer membrane / runner dehumidification system
If long-term low-temperature and low-humidity test conditions are required, then the cellular dehumidification system is an option, and the Humidity Range is required to achieve 10 ° C / 10% RH or less.
We provide complete specifications from the United States imports of professional LN2 / LC02 solenoid valves and related control systems to achieve your rapid cooling temperature of the test requirements.
5. Ultrasonic cooling humidification system
If you have to carry out a dynamic test of high heating load under high temperature and high humidity, the ultrasonic cooling and humidification system is meeting the important requirements of this strict requirement.
6. Added glass inner door and hand operated hole
For the often need to test the movement of objects and start. (125mm * Ea) can be added to the glass door to avoid the impact of the door opening on the test environment.
7. Instant access to test data recorder
When the need to test the environment at the same time and the temperature of the multi-point measured object temperature measurement records, increased load specification recorder is the only choice to achieve the demand.
8. Computer connection operation recording software
When the software for the R & D of Metrology 's ring testing machine, its powerful function can monitor and control the machine at the same time, access to the information in the machine, providing the most convenient
|Temp & Humidity Range||-70℃,-60℃,-40℃,-20℃,0℃～+150℃||10％～98％RH(Optional)|
|Temp & Humidity Fluctuation||±0.3℃～±0.5℃||±2.5％RH|
|Temp & Humidity Deviation||±0.5℃～±2℃||±3％RH(＞75％RH);±5％RH(≤75％RH)|
|Temp Change Rate||2℃～2.5℃/m heat-up||1℃/m cool-down|
|Standard configurations||1 Window, 1 Cable port, 1 Lamp, 4 Casters, 1 Power cable, 2 Stainless steel shelves|
|Standard Documentations||quality certification,test report ,user operaion manual for machine & controller|
|Safety devices||Electric leakage, fan overheat ,anti-dry ,compressor overheat & overpressure,power supply undercurrent,overheat, overcurrent, phase sequence, over-temperature protection devices|
|Customizable zone||Size,Color,Coling System,Temperature Range(-70,-60,-40,-20 ~ +150°C|
Precise circuit control
Contact Person: Arthur